Bigfoot sighting

K7QI ham radio cartoon QSL by N2ESTEver seen Bigfoot on a QSL card before? Me neither. Until now.

Jim, K7QI, lives in the Pacific Northwest and wanted something unique to his region. Bigfoot reputedly lives there, so why not put Bigfoot on Jim’s QSL card?

That’s exactly what I did. He’s sitting there sending CW on a cartoon approximation of Jim’s Elecraft rig. And because Bigfoot sightings are rare, I drew a squirrel in there to take a picture of him. Now you know what that Summits on the Air station from Washington looks like …

K7QI ham radio cartoon QSL back by N2ESTThe back of Jim’s card is as personalized as the front. I offer two report forms: a generic one that fills only half the card and allows mailing your QSL as a postcard, and a more complete one like this. Most clients go for the more complete report form. It includes a state map with your QTH marked, complete QTH information, your call sign set in a style that matches the art where possible, and whatever logos you care to include. Most clients go with the ARRL diamond and perhaps their home club’s logo, but Jim went for logos that highlighted his military experience and his involvement with the National Rifle Association. If it fits, I can give you any logo you want — and it’s included in the price of your card.

 

Related Images:

Let it snow in Buffalo

K2QW ham radio cartoon QSL by N2ESTWith fall upon us and much of the U.S. still experiencing warm weather, it’s easy to forget that parts of the country will experience serious cold within a few months. One of the coldest places in the country: Buffalo, New York.

Phil, K2QWK, lives in a suburb of Buffalo and wanted a QSL that commemorated exactly that quality about his QTH. He also wanted his ill-tempered cat on the card as well. (If you were that cold for months on end, you’d probably be ill-tempered too.)

To do that, I made an ice sculpture out of Phil’s call sign. I added snow, lots of snow, with a few snowflake “dingbats” placed in the bottom line of type. And to top it off, I dressed the cat (scowling, of course) in a stocking cap and a scarf.

This brings up an interesting question: If you experience severe cold weather where you live, what do you plan to do to “winterize” your antennas, towers and feedlines?

 

Related Images:

Flying over Albuquerque

K0WBG ham radio cartoon QSL by N2ESTMathias, K0WBG, wanted a lot on his QSL — a caricature of himself, something about ham radio, something about Albuquerque, and a Cessna plane with a very specific color scheme from his flight club. Oh, and could I make sure to use a certain tail number?

I squeezed as much as I could onto this QSL card but ultimately had to choose between his caricature and an accurate representation of the plane; I couldn’t do both because their scales just didn’t match, and a postcard is too small to make it work. I ultimately went for the plane, using a combination of lightbox and eyeball to get it right. Ham radio is there through his call sign in the clouds, and that tower on the left is from Albuquerque International Sunport.

Maybe it’s a guy thing, or maybe it’s just my left brain giving my right brain a rest. In any case, I’ve always loved drawing hardware. This one was fun.

Related Images:

Irritated x-rayed penguin

M0IXP ham radio cartoon QSL by N2ESTI first met Dave through the Atlanta Radio Club a few years back when he was KG4ZGG. He commissioned me at the time to draw him as a penguin (I think it had something to do with Linux). I happily obliged.

Dave is now in England sporting a new call sign, M0IXP. That called for a new QSL as well. He’d adapted the phonetics “Irritated x-rayed penguin” for his call, so it seemed appropriate to bring the penguin out of retirement for this custom cartoon.

This is what I came up with. It has ham radio, it has an x-ray and it has Dave as an irritated penguin. Add a hand-lettered call sign in a font inspired by the cartoon “Ren & Stimpy,” and there you have it. I’m not sure I could explain what I came to draw past that, but it makes me smile anyway. I hope you like it, too.

Related Images:

Retired and loving it

N9JO ham radio cartoon QSL by N2ESTJim, N9JO, didn’t give me much to work with when he commissioned this QSL. “I’m a former electrical engineer,” he told me, “and I’m retired.” That only narrowed it down to about half of the hams currently licensed.

Then he sent me a photo he’d found online of some other ham, asleep in his shack, feet up and sending CW with his toe. “QLF” it said. And that, I realized, was the hook.

What’s it like to be retired and hamming? It’s kinda like the guy in that picture — so that’s how I drew Jim. I added some loose hand lettering and bright blocks of color, and this is what I came up with. I can only hope to relax in my shack like that some day!

Related Images:

Exit, pursued by a bear

W7CBA ham radio cartoon QSL by N2ESTSteve, W7CBA, lives in Montana and likes the great outdoors. Can you draw me being chased by a grizzly, he asked? Sure, I said. And thus began this QSL card.

I changed it up a little, with Steve fleeing in panic while the bears size up his abandoned handi-talkie and backpack. Next thing you know, the bears are going to want to get their Tech licenses. (By the way, there’s a really good Tech study guide that just came out with illustrations by N2EST. I imagine the bears will either find it helpful or delicious.)

For extra points: Who recognizes the source of the above headline? Hint: He wasn’t a ham-radio operator but did have something to do with Hamlet.

Related Images:

Happy hams end to end

Happy hams end to endHamtoons is back — but after more than four months away from my drawing board, I was rusty. I needed a running start to get back into it. That’s why I decided to finish this goofy drawing of two happy hams doing the bump.

It originally was a rejected sketch for a QSL. The client wanted something that represented his work, end-to-end software solutions, if I remember correctly. But how exactly do you draw that? You can’t — so instead I presented him with the dancing pigs. It’s just where my mind went. I mean, hey, it’s ham radio, right? And the two hams are end-to-end, right?

He didn’t go for it. Still, I liked the sketch, so I filed it away. This afternoon I finished it for your listening and dancing pleasure. Enjoy.

To those of you waiting on commissions: I’ll be contacting you shortly. Thank you so much for your patience.

Related Images:

Desert sunset … with a dog

N7XTM ham radio cartoon QSL by N2ESTTed, N7XTM, has two passions: his radios and his rottweilers. My job was to combine them into a single card.

For reference, Ted supplied me with pictures of his dogs and pointed me to his qrz.com page, where there was a photo of his Cushcraft R7000 ground-mounted vertical framed against a gorgeous Arizona sunset. I stitched the two together into a single cartoon. I hope it does the real thing justice.

Related Images:

A different kind of home-brew

K5MAF ham radio cartoon QSL by N2ESTMike, K5MAF, has another hobby in addition to ham radio — he brews beer. And what goes better together than an adult beverage (in moderation, of course) and ham radio?

Mike wanted QSL art that reflected that combination, with roosters both hamming and imbibing. With slight modifications, the art will also appear on his beer labels.

I’m grateful to Mike not just for the commission but for his patience; we’ve been talking about this back and forth for months at meetings of our radio club, the South Canadian Amateur Radio Society in Norman, Oklahoma. Thanks for waiting, Mike. I hope it was worth it.

Related Images:

A typical ham workbench

W4ASE ham radio cartoon QSL by N2ESTWhen creating a custom QSL I usually start with reference photos from the client. Bill, W4ASE, sent me shots of his shack and his workbench — without him in them —and almost as an afterthought added that he didn’t want to appear on his QSL.

Normally, I avoid drawing pictures of just stuff. After all, why labor over a drawing of the latest hot transceiver when A) you can get a much better picture of it online and B) everyone already knows what it looks like anyway? Unless it’s home-brew or otherwise atypical, a picture of a ham’s shack without him in it is nothing unique. I like unique.

The picture of Bill’s bench, though, was another matter. Even without showing Bill in it, it said a lot about him: Here’s a ham who likes to work on his own rigs. That’s rare these days.

Even though the picture showed very specific test gear, I cartooned it up everything a little, drawing off-center lines where things were actually square. I also added blocks of color rather than specifically staying in the lines. Not only did it give the cartoon that ’60s retro look I like, it suggested the joyful clutter of a typical ham’s workbench. It ought to speak to anyone who receives Bill’s QSL.

Related Images: